Home
About
Technical
Business
Terms
Products
Contact & Inquiries
Frequently Asked Questions
1. Can I use Nickel Metal Hydride cells with Melcon modules ?
2. What is the difference between 4 and 5 pole modules.
3. Can an integrated unit be used for mains only ?
4. What is mercury migration ?
5. Are inverters suitable for continuous duty?
6. What is the upper temperature limit for batteries on Melcon modules ?
7. What is the link or switch for in some Melcon modules ?
8. Are Melcon modules tested to BSI standards and Kite Marked ?
9. What standards are Melcon modules manufactured to ?
10. What colour LED should be used ?
11. Can I use amalgam lamps for emergency lighting ?
12. Can I use 26, 32 or 42 watt TE lamps on 4 or 5 cells ?
13. How do you charge or recharge a battery ?
14. What is deep discharge protection ?
15. Can I use a DR227 with 38 watt 2D T5 lamp, at a distance greater than 0.5 m.?
16. Can I use Integrated Products with switching devices, eg PIRs ?
17. What is the lower temperature limit of lamps on Melcon modules and inverters ?
18. Can I do my own conversions ?
19. Does Melcon have a Declaration of Conformity ?
20. Will Melcon carry out Luminaire Conversions ?
21. What is Q Start ?
22. Should I fuse protect the unswitched supply in emergency luminaires ?
23. Is there a minimum test time associated with some HF ballasts ?
24. Can I use 28 watt 2D lamps on DR227, the 38 watt Integrated module ?
25. Can I use 28 watt 2D lamps on D224, the 16 / 21 watt Integrated module ?
26. Why are SLA650 and SLA80 fitted with 6 volt batteries, for connection to 12 volt
lamps ?
27. Can I separate the SLA or LV unit from the lamp by up to 3 metres ?
(SLA80 and SLA650, LV1250)
28. What are the K factors (F5, F60 and Fend) of your modules ?
29. Are your published Ballast Lumen Factors verified by Test House ?
Print This
Inquire
FAQs
Glossary
Instruction Leaflets
Case & Wiring Diagrams
Click above to see our Products.
© 2005 - 2006 Melux Control Gears Pvt. Ltd.
Contact us
|
Legal disclaimer
|
Privacy
FAQs